12 Sept 00

This is a list of the proprietary parts from my current working drawings:

Part #		Qty	Description						Drawn?
------		-----	-----------						-----------
18-701		1	Platform assembly					n				
18-702		1	Pitch carriage assembly					n
18-703		1	Control stick assembly					n
18-704		1	Forward Roll bellcrank assembly				y			
18-705		1	Aft Roll bellcrank assembly				y
18-706		4	Rod end spacers (for transverse roll pushrod)		y
18-707		1	Roll transverse pushrod					y
18-708		1	Push-pull tube guide assembly
18-709		2	Phenolic mounting pads, platform, large			y
18-710		1	Phenolic mounting pad, platform, small
18-711		1	Phenolic mounting pad, push-pull tube guide
18-712		1	Pitch push-pull tube assembly, forward section		y
18-713		1	Pitch push-pull tube assembly, aft section		y
18-714		1	Roll push-pull tube assembly, forward section		y
18-715		1	Roll push-pull tube assembly, aft section		y
18-716		1	Modified 18-441-1 mixer carriage assembly 
			(refundable $75 core charge)
18-717		1	Aft roll bellcrank support assembly
18-718		1	Pitch trim torque spring
18-719		1	Pitch trim lever assembly
18-720		1	Pitch trim lever mounting angle
18-721		1	Pitch trim degree plate
18-722		3	Access cover flange material
18-723		2	Push-pull tube cover mounting angles
18-724		1	Push-pull tube cover
18-727		1	Roll bearing spacer					y

Bearings

This list of bearings is pretty solid. I have most of these in stock:

11-161		4	Ball bearing rod end; equiv Fafnir RE3M6-2N
11-160		2	Bellcrank plate bearing; equiv Fafnir BC4W9 or BC4W10
18-725		2	Ball bearing; equiv Fafnir KP3
18-726		4	Plain 1/4" rod end; equiv Heim HM-4

Hardware

Most of the hardware list is TBD. These are the ones I know about:

AN509-10Rx	10	Mounts platform to fuselage
AN509-10Ry	3	Mounts Push-pull tube guide to fuselage
AN3-a		4	Mount 11-161s to control horns
AN4-b		2	Mount HM-4s at middle of longitudinal push-pull tubes
AN4-c		2	Mount HM-4s at ends of transverse roll pushrod
AN4-dA		2	Mount 11-160s to roll bellcrank supports
AN4-e		2	Attach pitch carriage assembly to platform assembly
AN310-4		2	Attach pitch carriage assembly to platform assembly
AN380-2-2	2	Attach pitch carriage assembly to platform assembly